ESP32 Project: Controlled Light Intensity

Embedded System Project: Controlling Light Intensity

======================

Specification:

• ESP32 Board
• LED 
• Project Board
• Resistor
• Capacitor
• Wire

Purposes:

• Make your ESP32 a webserver that publishes controlled light intensity without security. Use a potentiometer (variable resistor) to set the required luminance, and an LDR to read the luminance.
• Try to control the light intensity from LED, so that when combined with the ambient light, the total luminance is near the set value.    
• If the ambient light is higher than the set luminance, then turn off the LED. Turn on the LED fully when the read value from the sensor is still lower than the set value.

Public Web Server: 

• https://sibekti.blogspot.com

Private View:

• NETPIE Freeboard: https://netpie.io

Project: